UltraRAE 3000 User’s Guide
22.5.5 Alarm Mode
There are two selectable alarm modes:
Latched
When the alarm is triggered, you can
manually stop the alarm.
The latched setting only controls alarms
for High Alarm, Low Alarm, STEL
Alarm, and TWA alarm.
Note:
To clear an alarm when the
instrument is set to “Latched,” press
[Y/+] when the main (Reading) display is
shown.
Automatic Reset
When the alarm condition is no longer
present, the alarm stops and resets itself.
1.
Press
[N/-]
to step from one alarm mode to the other.
2.
Press
[Y/+]
to select an alarm mode.
When you have completed your selections, press [MODE].
You will see two choices: Save and Undo. You have the
opportunity to register the new settings or to change your mind
and revert to your previous settings.
•
Press [Y/+] to save the changes.
•
Press [N/-] to undo the changes and revert to the previous
settings.
72
Summary of Contents for UltraRAE 3000
