Rae UltraRAE 3000, User Manual

Page: 83 / 129

UltraRAE 3000 User’s Guide
22.7.5 User Mode
The instrument has two user modes:
Basic
Basic users can only see and use a basic set of
functions.
Advanced
Advanced users can see all screens and perform all
available functions.
Note:
The default value for User Mode is Basic.
To change the User Mode:
1.
Press [N/-] to step from one option to the next. The highlighting
changes each time you press [N/-].
2. Press [Y/+] to make your selection (the dark circle in the “radio
button” indicates “on”).
3. When you have completed your selection, press [MODE].
4. Press [Y/+] to accept the new User Mode. Press [N/-] to discard
the change and move to the next sub-menu.
22.7.6 Date
The Date is expressed as Month/Day/Year, with two digits for each.
1. Press [Y/+] and the display shows the current date. Note that
the left-most digit flashes to indicate it is selected.
2. Press [Y/+] to step through all 10 numerals (0 to 9).
3. Press [N/-] to advance to the next digit. The next digit to the
right flashes.
Repeat this process until all six digits of the new date are
entered.
Press [MODE] to exit.
•
Press [Y/+] to save the new date.
•
Press [N/-] to undo the change and move to the next sub-
menu.
81