How to Use this Manual
WinLink User and Installation Guide
Version 1.750
1-16
interface protocol of WinLink™ 1000 is designed to ensure non-stop,
high quality transmission, even when encountering interference and
harsh conditions.
Automatic Adaptive Rate
Automatic Adaptive Rate is a method of dynamically adapting the
transmitted rate by changing both the signal modulation and coding.
Automatic Adaptive optimizes the data throughput according to
interference conditions, to optimize data throughput while maintaining
service quality.
Unique Multi Point-to-Point Deployment
RADWIN's WinLink™ 1000 products can be installed in a unique multi
point-to-point architecture. Multiple units are deployed in one hub site
location, from where they provide a dedicated, high-capacity
connection to each remote site.
This unique concept builds on RADWIN's Hub Site Synchronization
(HSS) feature, which synchronizes the transmission of collocated
WinLink™ 1000 units, thus virtually reducing mutual interference
commonly experienced with collocated TDD radios.
Enhanced Air Interface Security
WinLink™ 1000’s AES 128-bit key encryption provides enhanced air
interface security.
Advanced Management and Performance Monitoring
The WinLink™ 1000 Manager software has full local and remote
management capabilities. The user-friendly SNMP-based management
tool provides full end-to-end configuration, event log, and performance
monitoring capabilities.
How to Use this Manual
This manual (WinLink User Manual and Installation Guide version
1.750) contains instructions for both setting up and managing the
WinLink™ 1000 system. The following topics are covered:
•
WinLink™ 1000 Hardware Installation
•
WinLink™ 1000 Manager Software Installation
•
Controlling and Monitoring the System Using the WinLink™
1000 Manager
•
Troubleshooting
