Link Configuration Wizard
WinLink User and Installation Guide
Version 1.750
5-81
Æ
To change the line code
1.
Run the Configuration wizard until you reach the Services dialog
box.
2.
Verify that T1 services have been selected.
3.
Click Next to open the TDM Parameters dialog box.
4.
Set the line code to B8ZS or AMI as required.
5.
Click
Next
.
Setting the TDM Backup (IDU-R only)
The IDU-R units have two E1/T1 trunk lines, one for WinLink™ air
interface via the ODU, and the second external is for peripheral
equipment- I.E. PBX. The external equipment status is displayed on the
Main screen of the Manager in IDU-R systems.
Figure
5-9: IDU-R - External Equipment Status
Æ
To use the Backup Mode
1.
Click Enabled Backup Mode.
2.
Set which link is backup link; either the link or the external
equipment.
The second link becomes the main link.
3.
Click
Next
to continue.
Æ
To disable the Backup mode
1.
Click Disable Backup Link
2.
Set which link is the Main Link; either the link or the external
equipment.
3.
Click
Next
to continue.
