Radwin RADWIN 2000 D+, User Manual

Page: 24 / 229

RADWIN 2000 D+ User Manual Release 3.6.00 4 ‐ 3
Power over Ethernet (PoE) Devices Chapter 4
• The RADWIN Manager software
• Quick Start Guide
• This User Manual
• Link Budget Calculator
• For each ODU, a self ‐ adhesive label with the MAC address and alternative Community
string. Keep these labels in a safe place for future reference.
• Cable glands (to be used with the HBS ‐ PoE cable)
• Quick Start Guide leaflet
4.2.3 Power over Ethernet (PoE) Devices
RADWIN’s Gigabit Power over Ethernet
(GbE PoE) device provides data and
power to RADWIN 2000 D+ outdoor
units. The PoE device is available with a
variety of AC cables with different plug
types.
This is the recommended PoE device for
use with HBSs and HSUs.
The unit comes with a VAC cable. Both
the cable length and plug are region
dependent.
Figure 4 ‐ 2: GbE PoE device
4.2.4 IDU ‐ H aggregation unit
The IDU ‐ H provides aggregation for multiple RADWIN ODUs and HBSs at a hub site. It
supports all RADWIN ODUs. It features ‐
• Six PoE ports (PoE legacy mode / RADWIN PoE)
• Up to 25W per PoE port
• 2 LAN Interfaces 10/100/1000 Mbps; auto ‐ negotiation
• SFP Interfaces: 2 x SFP ports of 1000 Mbps (standard MSA)
It is 19” rack mounted, 1U and half width. Power feeding is 44VDC ‐ 56VDC, Dual redundant
inputs through standard IDU ‐ C type adapters.