Radwin RADWIN 2000 D+, User Manual

Page: 45 / 229

RADWIN 2000 D+ User Manual Release 3.6.00 5 ‐ 6
The RADWIN Manager Log ‐ on Concept Chapter 5
• An Observer has read ‐ only access to the sector. An Observer can monitor the sector,
generate reports, but may not change any sector parameters.
• An Operator can install and configure the sector.
• An Installer can, in addition to functioning as an Operator, also change the operating
frequency band (or regulation). The latter function has legal ramifications, requiring
familiarity with local regulations.
You may choose the SNMP version. If your firewall blocks SNMPv3 messages and for security
reasons cannot be changed them use SNMPv1.
If you are using Trap Authentication, enter the User and Password. Leaving these fields blank
or incorrect, will not prevent you from logging on. You will not be able to see trap messages
directed to the trap message address associated with a defined user. The allocation and
association of a trap address with a user is described in Management .
If you are connecting through the RNMS server check the RNMS connect button and enter
your server IP address.
The following table summarizes these options:
The Network Manager should change the default passwords as soon as possible, particularly
if SNMPv3 is to be used.

Continuing the log ‐ on procedure:
5. If your User Type is not Operator, then choose it now.
6. Enter the password for your user ‐ type.
7. If you are a user with Read ‐ Write permission, click Options to enter the Community
options if required.
Table 5 ‐ 2: User types, default passwords and function
User Type
Default
Password
Function
SNMPv1 SNMPv3
Community
Communi
ty
String
Password
Default
Value
Observer admin Monitoring Read ‐ Only public Read ‐ Only public
Operator admin
Installation,
configuration
Read ‐ Write netman Read ‐ Write netman
Installer wireless
Operator plus
set ‐ band
Read ‐ Write netman Read ‐ Write netman
Note
• Leave the default Community passwords, netman for read ‐ write, and
public for read ‐ only.
• If you are a user with read ‐ only permission, then you may only log on
as Observer.
• The two fields serve as SNMPv1 Community strings and SNMPv3 pass ‐
words.