Radwin RADWIN 2000 D+, User Manual

Page: 108 / 229

RADWIN 2000 D+ User Manual Release 3.6.00 8 ‐ 2
Retrieving Link Information Chapter 8

To get diagnostics:
1. Click the Get Diagnostics button:
Figure 8 ‐ 1: Get Diagnostics window
2. Select or deselect the data options. If the file is to be sent to RADWIN Customer
Service leave all options checked.
3. Click File Path to specify the file name and older in which you want to save the file
and then click Run to save the information.
On completion, the status of the checked items is confirmed:
Site Configuration Data about the site parameters
Monitor Detailed event data record
Active Alarms Active Alarms are raised for any event affecting availability or quality
Service Configuration Settings: MIMO, Tx Ratio, MIR, VLAN, QoS
Performance Monitor Network performance data over defined time periods ‐ ‐ every 15
Spectrum Analysis For HBS, selected HSUs and general inter fence statistics for the sector
Table 8 ‐ 1: Get Diagnostics Data and Description (Continued)
Data Description