Radwin RADWIN 2000 D+, User Manual

Page: 80 / 229

RADWIN 2000 D+ User Manual Release 3.6.00 6 ‐ 28
Telnet Access to Either ODU Chapter 6
set readpw <oldpasswd>
<passwdRADWIN PtP SCB Jet>
Set the read access password (Read Community)
set writepw <oldpasswd> <passwd>
Set the read ‐ write access password (Read ‐ Write
Community)
set trappw <oldpasswd> <passwd> Set the trap Community string
set buzzer <mode> mode: 0 = off, 1 = auto, 2 = on
set tpc<power:Value between
minimal Tx power, and maximal Tx
power>
Set the ODU Tx Power. If a wrong value is entered,
both min and max values shall be displayed in the
error reply
set name <new name> Set the name of the link
set location <new location> Set the name of the location
set contact <new contact> Set the name of the site manager
set ethernet <port:LAN1>
<mode:AUTO,10H,10F,100H,100F,D
ISABLE> Set the mode and speed of the Ethernet port
reboot
Resets the ODU. The user is warned that the
command will reset the ODU. A new Telnet session to
the ODU may be opened after the reset is complete.
help Displays the available commands
Table 6 ‐ 3: ODU Telnet ‐ Set Commands requiring Reset
Command Explanation
set secId <SectorID> Set new sector ID
set ldpc_mode <mode:on,off> Sets ldpc mode
Table 6 ‐ 2: ODU Telnet ‐ Set Immediate Commands (Continued)
Command Explanation