Radwin RADWIN 2000 D+, User Manual

Page: 158 / 229

RADWIN 2000 D+ User Manual Release 3.6.00 14 ‐ 2
Bulk Software Backup Chapter 14
Figure 14 ‐ 1: Bulk Backup setup window
The default sites shown in the Bulk Backup list panel belong to the currently installed
link. The list may be empty if you are running the RADWIN Manager “offline”.
2. The Bulk Backup list title bar has three buttons on the right hand side.
Figure 14 ‐ 2: Add / Remove site buttons
The left button opens up a Windows file dialog to locate a list of locations to backup.
The list has the following format for SNMPv1:
<IP address>,<Read ‐ Only community>,<Read ‐ Write community>
For SNMPv3 it is:
<IP address>,<Dummy>,<User_type><Password>
For example:
10.104.3.2,netman,admin,netwireless
10.104.3.4,netman,admin,netwireless
A PtMP list will contain the HBS and registered HSUs.
The center button allows you to add a single site: