Radwin RADWIN 2000 D+, User Manual

Page: 14 / 229

RADWIN 2000 D+ User Manual Release 3.6.00 2 ‐ 2
Components of a RADWIN 2000 D+ Link Chapter 2
» Dedicated Bandwidth ensuring SLA & latency
» Low and constant latency – min < 3ms
» Channel bandwidth – 10/20/40/80 MHz
» Regulations supported ‐ FCC/IC/ETSI/WPC/MII/Universal
» Simple to deploy
» Web Interface for link management
» SFP support when connecting to a IDU ‐ H in place of a PoE device
» 750 Mbps aggregate throughput
» Fully integrated with RADWIN Legacy solutions:
• Coexist (HBS ‐ collocatable) with RADWIN 2000 and RADWIN 5000 products
• Common RADWIN Manager
• Common RNMS
» Separate uplink and downlink configurable Maximum Information Rate (MIR)
2.4 Components of a RADWIN 2000 D+ Link
2.4.1 Major Components
The major element of each site is the ODU radio transceiver. The ODU actually contains two
radios, which may be connected to a dual pole integrated or external antenna. The ODU itself
is connected to a PoE device. The PoE provides an Ethernet LAN connection to user
equipment (typically a switch).
2.4.2 Accessories
To build a RADWIN 2000 D+ link you will require some of the following accessories:
• PoE devices ‐ Both Gigabit and 100 Mbps
• HSS unit ‐ Collocation unit for intra ‐ site synchronization
• IDU ‐ H Aggregation unit for a collocated hub site instead of multiple PoE devices
• GSU for inter ‐ site synchronization
• Antennas ‐ A wide variety of directional and link antennas is available
• ODU and antenna mounting kits
• Lightning protector for use with all RADWIN outdoor products
• Ethernet repeater ‐ enables you to extend non ‐ GbE PoE ‐ ODU cables beyond the 100m
limit
• CAT 5e cables of various lengths specifically for use with RADWIN radios and PoE
devices
• Grounding cables