RADWAG MAS Y, User Manual, Page: 51 / 201

- 51 -
4. Press < Minimum sample weight> field.
5. Wait for Minimum sample weight window to open.
6. Press <Method> field,
window with a list of database-stored methods opens.
6. Select respective method.
7. Previous menu is displayed.
8. Press <Mode> parameter.
9. Settings box is displayed, select respective option:
Block – select to display pictograms informing you on status of weighed mass
(weighed mass below/above minimum sample weight) and to disable accepting the
measurement result if it is below the minimum sample weight limit.
Warn – select to enable display of respective pictograms informing you about the
measured mass (whether it is lower than the MSW value or higher than the MSW
value). You can accept the measurement that is lower than the MSW value. Mind
that on a printout it will be preceded by an asterisk (*).
10. Set the parameters and exit the menu.
11. Section presenting the weighing result comprises additional pictogram providing
supplementary information. The pictogram changes in the course of weighing
operation, it informs you on the weighed sample mass; the information is referred to
the declared minimum sample weight value.
Weight value lower than the MSW value
specified for a particular tare range. Weight value higher than the MSW value
specified for a particular tare range.
Pictograms providing MSW-related information:
Weight value lower than the specified MSW value.
Weight value higher than or equal to the specified MSW value.
Weight value lower than the specified MSW value. a pictogram with a clock
informs on expiry of the minimum sample weight validity period (it is
displayed two weeks before the determined expiry date).
Weight value higher than the specified MSW value. a pictogram with a
clock informs on expiry of the minimum sample weight validity period (it is
displayed two weeks before the determined expiry date).