RADWAG MAS Y, User Manual, Page: 116 / 201

- 116 -
-
Characteristics of sample's 2T negative
errors:
- Net weight of the controlled product
- Packaging tare
- Control status
Load empty 1/3 -
Prompt regarding process course.
Command specifying value of batch
portion.
-
Workspace modification: numerical
data/graph
- Abort control.
Upon control completion, a report is generated, control is automatically saved to database.
CAUTION:
The template and an example of control report are to be found further down this user
manual.
28.10. Destructive Empty-Full And Full-Empty Control Mode
In case of
Destructive control, for lot exceeding 100 pcs, sample set by the software for test
is always 20 pcs. The other control assessing criteria are set in accordance with the law
regulations.
Procedure:
Select product from the list, set parameters for destructive control and determine
batch
portion value.
Start destructive control; prompts helping you to go through control process are displayed
(as in case of the controls described above).
Depending on set control mode, the order of products to be weighed is either:
empty-full or
full-empty .
CAUTION:
It is necessary to weigh empty packages in the same order as packages filled with product.
With this, software correctly calculates mass of a load placed in its corresponding packaging.
Upon control completion, summary of the process is generated, control is automatically
saved to database.
CAUTION:
The template and an example of control report are to be found further down this user
manual.
28.11. Control According To Internal Criteria
Select appropriate product with data on control entered correctly in accordance with internal
criteria (see: previous sections of this user manual).
Enter PGC mode parameters into balance memory (in accordance with user manual).
Press button to start control.