RADWAG MAS Y, User Manual, Page: 172 / 201

- 172 -
pressing).
Example:
Command: US_mg<CR><LF> - set „mg” unit
Response: US_mg_OK<CR><LF> - „mg” set as a current unit
Give current unit
Command overview:
Command returns current unit.
Format: UG<CR><LF>
Response options:
UG_x_OK<CR><LF>
- command carried out, returns accessible units
UG_I <CR><LF> - command understood but not accessible at this moment
x - parameter, units symbols:
Example:
Command: UG<CR><LF> - return current unit
Response: UG_ct_OK<CR><LF> - currently set unit is „ct”
Activate sound signal
Command overview:
Command activates BEEP sound signal for a specified amount of time.
Format: BP_TIME<CR><LF>
Response options:
BP_OK<CR><LF>
- command carried out, BEEP activated
BP_E” <CR><LF> - no parameter or incorrect format
BP_I <CR><LF> - command understood but not accessible at this moment
TIME - parameter, decimal value specifying how long shall the sound last, parameter given
in [ms]. Recommended range <50
÷
5000>.
If value greater than the permissible high limit is given, then BEEP sound is operated for the
maximum permissible amount of time.
Example:
Command: BP_350<CR><LF> - activate BEEP for 350 ms
Response: BP_OK<CR><LF> - BEEP activated
CAUTION:
BEEP sound activated via BP command is inhibited if in-course of its activation the sound is
activated by means of other device: keypad, touch panel, proximity sensors.
Send all implemented commands
Format: PC CR LF
Command: PC CR LF - send all implemented commands
Response: PC_A_”Z,T,S,SI…”
- command carried out, the indicator sent all
implemented commands.
Give balance type
Format: BN <CR><LF>
Response options:
BN_A_”x” <CR><LF> - command understood, response: module type
BN_I <CR><LF> - command understood but not accessible at this moment