RADWAG MAS Y, User Manual, Page: 177 / 201

- 177 -
PROFILE OK CR LF - command understood, new profile set
LOGIN ERROR CR LF - command understood, an error in name, profile setting impossible
ES CR LF - command not recognized (error in format)
Give accessible units
Command overview:
Command returns units available for a particular device and for a current working mode.
Format: UI <CR><LF>
Response options:
UI_”x
1
,x
2
, … x
n
”_OK<CR><LF> - command carried out, returns accessible units
UI_I <CR><LF> - command understood but not accessible at this moment
X - unit symbols, separated by means of commas
x
→ g, mg, ct, lb, oz, ozt, dwt, tlh, tls, tlt, tlc, mom, gr, ti, N, baht, tola, u1, u2
Example:
Command: UI <CR><LF> - return available units
Response: UI_”g, mg, ct”_OK<CR><LF> - response: available units
Set current unit
Command overview:
Command sets current unit for a particular device.
Format: US_x <CR><LF>
Response options:
US_ x_OK <CR><LF>
- command carried out, returns accessible units
US_E <CR><LF> - error in-course of command execution, no parameter or
incorrect format
US_I <CR><LF> - command understood but not accessible at this moment
x - parameter, units symbols: g, mg, ct, lb, oz, ozt, dwt, tlh, tls, tlt, tlc, mom, gr, ti, N, baht,
tola, msg, u1, u2, next
Caution:
If x=next the command swaps to another available unit on the list (it simulates button
pressing).
Example:
Command: US_mg<CR><LF> - set „mg” unit
Response: US_mg_OK<CR><LF> - „mg” set as a current unit
Give current unit
Command overview:
Command returns current unit.
Format: UG<CR><LF>
Response options:
UG_x_OK<CR><LF>
- command carried out, returns accessible units
UG_I <CR><LF> - command understood but not accessible at this moment
x - parameter, units symbols:
Example:
Command: UG<CR><LF> - return current unit
Response: UG_ct_OK<CR><LF> - currently set unit is „ct”