RADWAG MAS Y, User Manual, Page: 194 / 201

- 194 -
Formulation: Skip ingredient Operator
Accept Left door opening/closing
Abort
44. APPENDIX D - ZEBRA Printer Settings
Baud rate
9600b/sec
Parity none
Bits 8bit
Stop bits 1 bit
It is possible to generate printouts either manually or automatically.
Serial port : 96, N, 8, 1
Procedure for printing information printout and resetting
printer parameters is to be found in ZEBRA printer manual.
45. APPENDIX E - Communication with Barcode Scanner
1. For communication with barcode scanners, RADWAG scales use RS232 interfaces and
simplex transmission (one-way direction), without handshaking. For this purpose, use of
second line of the cable is sufficient. Transmission parameters can be set for both
weighing devices and scanners.
2. Transmission parameters can be set for both weighing devices and scanners. For both
devices the following parameters must comply: baud rate, data bits quantity, parity
control, stop bits quantity; e.g. 9600,8,N,1 – baud rate 9600 bit/s, data 8-bits, no parity
control, 1 stop bit.
3. Barcode scanners can send additional information apart from the expected barcode;
e.g. symbology (type of barcode). Due to the fact that RADWAG devices and software
do not use such information, it is advisable to disable it.
4. Some RADWAG systems can omit unnecessary information by using parameters that
mark the beginning and the length of the code required to analysis.
5. A special protocol is required in order the code be received by RADWAG equipment. It
is required to program an appropriate prefix and suffix . In RADWAG-adopted standard,
the prefix is 01 sign (byte) hexadecimal format, the suffix is 0D sign (byte) hexadecimal
format.
6. Most barcode scanners allow to enable/disable different symbologies (barcode types).