Radiometer Analytical TitraLab 870, Reference Manual

Page: 49 / 286

Titra Lab ® TitraLab 870 Reference Manual
Page 49
Addition
method -
programmation For a 1-addition method
Refer to "Addition method - definition", page 48 .
For a 2 or 3-addition method
At the Simultaneous additions , select whether you want
to perform the additions simultaneously or one after the other.
• In the case of simultaneous additions:
• In the case of additions performed one after the other:
For the Auxiliary output parameter, see "Auxiliary output", page 55 .
In an Addition method, it is not possible to run 2 additions of
the same reagent.
In an titration method, it is also possible to run one reagent
addition before the titration starts,
see "Addition", page 47 .
Enter the delay to wait at the end of the 2 or 3 additions (00:00 to 99:59 min:s).
Enter for each addition, the reagent name and the volume to be added (1 µl to
999 ml).
Enter for each addition, the reagent name, the volume of reagent to be added
(1 µl to 999 ml) and the delay to wait at the end of the addition (00:00 to
99:59 min:s).