Radiometer Analytical TitraLab 870, Reference Manual

Page: 47 / 286

Titra Lab ® TitraLab 870 Reference Manual
Page 47
Add. reagent =
Titrant The reagent used for addition is the same as the titrant used for the
titration.
Press
✓
and define an addition reagent different from the titrant in the
Parameters screen of the method.
Addition Select Yes to carry out a reagent addition at the start of the titration or
a reagent calibration. This addition takes place before the titration
starts (predose included).
The reagent is added using a second burette controlled by the Titration
Manager
. This second burette can be installed on the Titration
Manager or on an ABU52 connected to the Titration Manager, see
"ABU1/ABU2", page 43 .
Edit an Addition method when you want to perform 2 or 3
reagent additions successively or simultaneously.
Refer to "Addition method - definition", page 48 .
Enter in:
Edit method > Parameters
Edit reagent > Calibration parameters
Addition delay Parameter of an Addition method, see "Addition method - definition",
page 48 .
For a 1-addition method or a multi-addition method with the
Simultaneous additions = Yes option selected, the
Addition delay is counted down at the end of the reagent
addition(s).
For a multi-addition method with the Simultaneous
additions = No option selected, an Addition delay is
to be set for each addition. An Addition delay is counted
down at the end of an addition and before the next addition is initiated.
While an addition method is running, you can carry on
regardless this delay by pressing key
Del .
Enter in:
Edit method (Addition method).
Range available:
00:00 to 99:59 min:s