Radiometer Analytical TitraLab 870, Reference Manual

Page: 248 / 286

Titra Lab ® TitraLab 870 Reference Manual
Page 248
The sequence is
empty You are trying to run or complete a sample stack/sequence experi-
ment which contains no programmed methods.
Go to Sequence/Sample stack, Edit sequence screen and check the
sequence.
TIM cell external
Gnd Specify in the Configuration menu if the grounding of the measuring
cell takes place using an external connection to the titration system.
This is the case when the solution is grounded via a metal shield or
via a conductivity cell connected to a conductivity meter.
The following configurations will be therefore not possible:
• connecting a metal electrode to the GND socket of the titration
system,
• connecting a double platinum electrode to the Pt-Pt socket of the
titration system.
If TIM cell external Gnd = Yes and a reference elec-
trode is connected to the Ref. socket of the titration system,
grounding will take place by an external link and not by the Ref.
socket.
If TIM cell external Gnd = No, grounding of the cell will be
determined in the method by the measurement type (pH, mV or mV
(i>0)) and the parameter Cell grounding (Reference/Metallic/Other).
Refer to "Cell grounding", page 75 .
Time max
(result
indicator) Refer to "Result indicators", page 206 .
Title Enter the title of the calibration report sheet (max. 23 alphanumeric
characters).
Enter in:
Edit method > Printouts
Edit reagent > Printouts
Edit electrode > Printouts