Titra
Lab
®
TitraLab 870 Reference Manual
Page 176
Printer
connection
Connect the printer to the
PC/Printer
socket on the rear panel using
the cable, 9-25 pin, part no. A95P201.
The printer must have the following characteristics for connection to
the Titration Manager.
•
80 characters,
•
RS232C interface,
•
9600 baud, no parity, 8 data bits, 1 stop bit,
•
Flux control via the DTR line (pin 20 on the 25-pin plug),
•
Printout of tables,
•
IBM fonts; character sets.
To connect the Kyoline MTP640 Thermal Pocket Printer, part no.
A70P020 (230 V), A70P021 (115 V), use the cable 5-9 pin, part no.
A95X506.
For use with a Titration Manager, the dip-switch of the Kyoline
MTP640 Thermal Pocket Printer should be set as follows:
Table 9: Dip switch setting of the Kyoline MTP640 Thermal Pocket Printer
Refer to "Printer cables - A95P201, A95X506", page 175
Print in table
If you have defined a printer in the Setup > Configuration menu, select
for
Print in table
if you want to print all the sequence results
in a table (one line per method) or to print the results method by
method (one frame per method).
Refer to "Programming sequence", page 181
.
Access:
Press
2
Sequence/Sample stack from the Main window.
SW no.
1
2
3
4
5
6
7
8
Setting
On
On
Off
Off
On
Off
On
Off
Summary of Contents for TitraLab 870
