Radiometer Analytical TitraLab 870, Reference Manual

Page: 164 / 286

Titra Lab ® TitraLab 870 Reference Manual
Page 164
Number of
digits Number of significant digits (1 to 5) to be displayed and printed for the
result calculated.
Example: If Number of digits = 4:
• 1456.1 is displayed “1456”
• 12.124 is displayed “12.12”
• 0.15872 is displayed “0.1587” (the first significant digit is “1”)
• 0.4 is displayed “0.4000” (the first significant digit is “4”)
Enter in:
Edit method > Results (for titration methods)
Edit reagent > Results
Number of
dynamic rinses If a SAC850 or SAC950 Sample Changer is in use, enter the desired
number of dynamic rinses to be carried out before each beaker
analysis of a SAC sequence,
see also "Dynamic rinses", page 102 .
Enter in:
Setup menu > Configuration
Range available:
0 to 9
Number of EP Number of end points (1 to 4) to be titrated to.
Only one end point is obtained during a back titration or a
reagent calibration.
Enter in:
Edit method > Method parameters menu (for End point method)
Number of
equations This is the number of extra results (0 to 2) to be calculated by the
method. These results are calculated using a user-programmed equa-
tion. This allows you to calculate the result in units which are not
available in the instrument.
Enter in:
Edit method > Results