User Manual 3162A/B
SCPI Command Reference 4-5
Arbitrary Block
Parameters
Arbitrary block parameters are used for loading waveforms into the generator's
memory. Depending on which option is installed, the Model 3162B can accept
binary blocks up to 1M bytes. The following command uses an arbitrary block
parameter that is loaded as binary data:
TRAC:DATA#564000<binary_block>
SCPI Command
Summary
Table 4-1 summarizes the complete SCPI command tree available to program
the generator over the GPIB. Refer to earlier sections in this manual for more
complete details on each command.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com