User Manual 3162A/B
Using The Instrument 3-2
Protection
the level of protection associated with each input or output connector.
Power On/Reset
Defaults
At Power On or as a result of a software reset, the Model 3162B defaults to the
conditions shown in Table 3-1. Also listed in this table are parameters that are
common or separate for each channel. A complete list of all parameters, their
default values, as well as their maximum and minimum values is given in
Chapter 4.
Use the following command to place the instrument in its default state:
RESet;
Using the IEEE-STD-488.2 common command *RST will have the same result
.
Function / Parameter
Default
Inter-Channel
Dependency
Output State:
Off
Separate
Operating Mode:
Continuous
Common
SYNC State:
Off
Common
SYNC Out Position:
Wave Start
Common
Output Function:
Standard
Separate
Output Function Shape:
Sine
Separate
Standard Wave Frequency:
1MHz
Common
User Wave Sample Clock:
1MHz
Common
Amplitude:
2V
Separate
Offset:
0V
Separate
Filter State:
Off
Separate
Filter Type:
Auto
Separate
ECLTRG0:
Off
Common
TTLTRG0-3:
Off
Common
Table 3-1, Default Conditions After Power On or After *RST
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com