![background image](http://html1.mh-extra.com/html/racal-instruments/3162a/3162a_user-manual_3137652089.webp)
User Manual 3162A/B
SCPI Command Reference 4-10
Table 4-1. VXIbus Model 3162B SCPI Commands List Summary (continued)
Keyword
Parameter Form (Default in Bold)
SCPI 1993.0
Notes
*CLS
Confirmed
*ESE
(0;0;255)
Confirmed
*OPC
Confirmed
*RST
Confirmed
*SRE
(0;0;255)
Confirmed
*TRG
Confirmed
*ESE?
Confirmed
*ESR?
Confirmed
*IDN?
Confirmed
*OPC?
Confirmed
*SRE?
Confirmed
*STB?
Confirmed
*TST?
Confirmed
Output
Configuration
Command
Summary
Output Configuration commands control output functions, shape, frequency,
amplitude, filter state, synthesizer agility and active (read) channel. Optional
modes may be omitted from these commands. Factory defaults after *RST are
shown in bold typeface. Parameter low and high limits are given where
applicable. Use the Standard Waveform parameters as described in
Using
The APPLy Command
.
Commands and Parameters
(Default,
Low
Limit, High
Limit
)
[:SOURce]
:APPLy:SINusoid {<frequency>,[<amplitude>,[<offset>,[<phase>]]]}
:APPLy:TRIangle {<frequency>,[<amplitude>,[<offset>,[<phase>]]]}
:APPLy:SQUare {<frequency>,[<amplitude>,[<offset>,[<duty_cycle>]]]}
:APPLy:PULSe {<freq.>,[<amp.>,[<offset>,[<delay>,[<high_time> ,[<rise_time>, [<fall_time>]]]]]]}
:APPLy:RAMP {<frequency>,[<amplitude>,[<offset>,[<delay>,[<rise_time>,[<fall_time>]]]]]}
:APPLy:SINC {<frequency>,[<amplitude>,[<offset>,[<number_cycles>]]]}
:APPLy:EXPonential {<frequency>,[<amplitude>,[<offset>,[<exponent>]]]}
:APPLy:GAUSsian {<frequency>,[<amplitude>,[<offset>,[<exponent>]]]}
:APPLy:DC {<percent_amplitude>}
:APPLy:USER {<segment_number>,[<sampling_clock>,[<amplitude>,[<offset>]]]}
:APPLy:<function_shape>?
:APPLy?
:FUNCTion:MODE {
FIXed
| USER | SEQuence}
:FUNCTion:MODE?
:FUNCtion:SHAPe {
SINusoid
| TRIangle | SQUare | PULSe | RAMP | SINC
:EXPonential | GAUSsian | NOISe | DC }
:FUNCtion:SHAPe?
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com