44
PAVO V140 / VHA 140
09.2011
Preparation for use - On-land
9.5 Basic settings - On-land ploughing
The basic settings described below for the “On-land ploughing” work mode are saved, and do not
have to be set again when the implement is started up again.
It is only necessary to set the mode again if:
the work mode has been changed in the meantime.
the plough was moved into the “neutral position”.
a different tractor is now being used.
The basic settings can be changed during operation.
•
•
•
9.5.1 Operating information
After starting the basic settings process,
the operating steps are specified.
The following button (D a n a c h) is
shown on the display (
a
).
Unassigned buttons are disabled.
Onland
D a n a c h
Operation can be interrupted by:
pressing the switch button
►
switching off the PAVOtronic
►
The tractor symbol
indicates in the following description that
the control device on the tractor must be
actuated.
a
9.5.2 Preparation
Operating information
Operation
Button or tractor hydraulics
Display
Before adjusting the basic settings:
Lift up the implement all the way with
the three-point power lift.
►
- - -
Fig. 41: Lifting the implement
Summary of Contents for Pavo V 140
