a
52
PAVO V140 / VHA 140
09.2011
10.0 travelling by road
Before travelling by road with the implement,
it must be rotated out of
storage
or
working
position
and into
transport position
.
to do so, the following preparations are
necessary:
Slightly lift the implement
Set the plough to a narrow working width
Turn the combination wheel to the
transport position and lock
Turn the plough to the transport position
and engage the transport lock.
Lower the plough onto the combination
wheel
Tighten the hydraulic top link slightly
(tractor operating instructions)
Apply lower link lateral lock (tractor
operating instructions)
Check the function of the lighting
•
•
•
•
•
•
•
•
DANGER
Risk of accident when travelling by road in working position due to the shifting centre
of gravity and the high load on the three-point power lift.
The implement may only be transported by road when in the transport position.
•
Fig. 52: Storage or working position
Fig. 53:
transport position
travel by road
Fig. 54: Storage or working position
Before rotation, check that:
the pick-up arm is folded into the transport
position (see Chapter 12.1 on page 71).
the support (a) is folded up and secured
•
•
NOtE
Before use, check the compressed
air supply for the tractor (tractor
operating instructions) and for
the implement (see Chapter 16.4 on
page 80).
Summary of Contents for Pavo V 140
