4
3
2
1
74
PAVO V140 / VHA 140
09.2011
Fig. 97: Lighting
12.3 Attaching the lighting unit
Slide the lighting bracket (
1
) into the holder.
Insert the fixing pin (
2
).
Secure the pin with the spring cotter (
3
).
Insert the connector for the lighting into
the lighting socket (
4
).
►
►
►
►
Working in the field
12.2 Preparing the plough for
transport by road
Before travelling by road with the implement,
it must be rotated out of
storage
or
working
position
and into
transport position
.
to do so, the following preparations are
necessary:
Slightly lift the implement
Set the plough to a narrow working width
Turn the combination wheel to the
transport position and lock
Turn the plough to the transport position
and engage the transport lock.
Lower the plough onto the combination
wheel
Tighten the hydraulic top link slightly
(tractor operating instructions)
Apply lower link lateral lock (tractor
operating instructions)
Check the function of the lighting
NOtE
For information on the above
listed tasks, refer to Chapter 10.0
on page 50.
•
•
•
•
•
•
•
•
Fig. 95: Storage or working position
Fig. 96:
transport position
Fig. 98: Attaching the lighting
Summary of Contents for Pavo V 140
