Rabe Pavo V 140, Operating Instructions Manual

Page: 68 / 102

W
1
2 3
W
68
PAVO V140 / VHA 140
09.2011
11.3.6 Adjusting the working width of each plough body - On-land ploughing
The working width ( W ) can be set to between
26 and 55 cm.
normal working width = 5 - 55 cm
Special working width = 26 - 4 cm
e.g. for driving around obstacles or as a
storage and transport position
•
•
Fig. 86: Working width
( 1 ) = Working width gauge Fig. 87: Working width gauge
Operating information Operation
Button or tractor hydraulics
Display
Press the “Working width” button. ►
Onland
A r b . - b r e i t e
3 5
. . .
5 5 c m
e i n s t e l l e n :
M i t S t e u e r g e r ä t g r ü n
Z y l i n d e r v e r f a h r e n .
Actuate the control device - green
- until the required working width has
been reached.
The parallelogram cylinder (2 , in
figure above ) and the wo rking width
cylinder (3 , in figure above ) move.
►
To switch off:
press the “Working width” button again.
►
Eine Taste drücken
Onland
PAVO
Furrow edge
Working in the field - On-land