Rabe Pavo V 140, Operating Instructions Manual

Page: 20 / 102

20
PAVO V140 / VHA 140
09.2011
3.0 Description of the implement
this section contains general information relating to your implement, as well as information regarding:
Characteristics of the implement
Description of the assemblies
Technical data
•
•
•
3.1 Functional description
The Pavo is an electrohydraulically-
controlled reversible plough attachment
mounted to the three-point power lift.
All working positions can be operated from the
driver's seat, using the electrohydraulic control.
The adjustable position of the first plough
body enables it travel with the tractor,
either with two wheels in the furrow = "in
the furrow"
or
with the tractor on the unploughed ground
= "on-land ploughing".
Working speeds between 4 and 8 km/h
ensure a consistent, precise ploughed
surface.
The frame construction with 140x140 mm
base frame and a hollow rotating axle
with 150 mm diameter guarantee that the
design is both robust and durable.
The Pavo V 140 can be supplied as either
a 5, 6 or 7-furrow variant and the Pavo
VHA 140 as a 5 or 6-furrow variant.
The working width per plough body can be
continuously adjusted between 5 cm and
55 cm.
On the variant with mechanical stone
protection, the shear bolts with their shear
groove ensure precise and clean shearing and
reliable protection of the intermediate legs from
damage due to overload (stone protection).
On the variant with hydraulic stone
protection (HA), the intermediate legs can
reliably avoid stones.
The working depth is adjusted hydraulically from
the driver's seat with the combination wheel.
Fig. 1: Working in the furrow
Fig. 2: Or on-land ploughing
Implement description