© Copyright QVIS ®. All documentation rights reserved.
64
Alarm Server:
To allow an alarm signal to be sent to a remote device you need to setup an
alarm server.
Figure 3.25 alarm center
[Protocol type]:
GENERAL;
[Enable]:
When ticked, you have enabled the AlarmServer function;
[Server Name]:
IP address of alarm server;
[Port number]:
port number of the device;
[Alarm Report]:
When ticked the device will send information, relevant to the
police, to the server;
[Log reporting]:
When ticked it means that when an alarm has been triggered
the device will send a send a report to the server’s log.
Summary of Contents for PIONEER 3
