© Copyright QVIS ®. All documentation rights reserved.
41
2.7
Recording function
Video-related operations, including:
video setup, video playback, video backup.
2.7.1 Video settings
Navigation (from shortcut menu):
Main Menu -> Set -> Storage -> Record
Conf.
Set the video parameters for the monitored channel. When you first start, the
system is set to 24 hours of continuous recording.
[Main menu]: > [recording
function]: > [Video Settings]:
.
Note:
The NVR will need to have a dedicated read/write hard disk drive
installed (for more detailed instructions, please refer to section 3.5.1)
Figure 3.1 video settings
[Channel]:
to select the appropriate channel number for the channel set, you
can then adjust all the settings for the chosen channel;
[Redundant]:
selecting the redundancy function will enable the system to
backup the video files. The selected video channel will be simultaneously
recorded onto two hard drives (If a secondary hard drive is installed). For
detailed operation, please refer to section 3.5.1);
Summary of Contents for PIONEER 3
