© Copyright QVIS ®. All documentation rights reserved.
45
2.8.1 Motion detection
Navigation (from shortcut menu):
Main Menu -> Set -> Alarm -> Motion
Detect
By analyzing the video image, when the system detects a mobile object within
the camera’s field of view the motion detection alarm and the linked functions
will be initiated.
Figure 3.4 motion detection
[Channel]:
Select the number of channels to be set.
[Enabled]:
Enable the motion detection alarm.
[Sensitivity]:
set the sensitivity level to one of six level options; lowest, low,
medium, high, very high;
[Region]:
Click ‘Set’ to enter the region set up screen. It is divided into a 22x18
segmented grid. When a segment of the grid is highlighted in red it means that
it has been fortified with the motion dection function, i.e. when an object moves
into the red regment of the screen the motion detection function will be enabled.
When the segment on the grid is not highlighted in red, the motion detection
feature will not be enabled (see Figure 3.5 area setup).
Hold down the left mouse button and draw an area highlighted in red. (By
default the entire area is selected for the monitoring area)
Summary of Contents for PIONEER 3
