Qvis PIONEER 3, User Manual, Page: 65 / 112

© Copyright QVIS ®. All documentation rights reserved. 58
PPPoE settings:
Figure 3.18 PPPoE
[Enable]: When the box is ticked the PPPoE is enabled.
To allow access to the ISP (Internet Service Provider) provide the PPPoE
username and password then restart the system after saving. After restarting,
the NVR will automatically establish a network connection to the PPPoE mode,
when successful, the IP [IP address] will automatically modify the dynamic
WAN IP address obtained.
NTP:
Figure 3.19 NTP settings