Qvis PIONEER 3, User Manual

Page: 30 / 112

© Copyright QVIS ®. All documentation rights reserved. 23
Configuration Wizard Key:
NUMBER
OPTION NAME DESCRIPTION
1 Search protocol
selection
Drop down list providing three different IP camera
search parameters: NETIP, ONVIF, ALL
2 Search Search for IP camera(s)
3 Add Add the IP camera(s) found during the search
process
4 Network (Settings) To configure the network settings of the camera,
firstly select the one you wish to configure from the
list, enter the camera’s user name and password,
then click the ‘Network’ settings button. You will be
able to set the IP address, subnet mask, and default
gateway (you cannot configure the network settings
of ONVIF protocol devices).
(Continued next page)
5 Quick set (hotkey
set up)
Select this option button to configure all cameras
found on the network under the same parameters.
6 Delete Delete camera
7 Clear Clear all configuration channels
8 Encoding
(Settings) Setup the front end configuration coding
9 Copy to Some information from selected channels can be
copied to the other channels, such as user name,
password, and other device information, as shown
below: