© Copyright QVIS ®. All documentation rights reserved.
52
2.9
System settings
This menu section allows the user access to customise ordinary settings, encoding
settings, network settings, network services, output mode, PTZ settings and serial
port settings.
You can access the system settings via
[Shortcut menu] > [Main Menu] >
[Settings]
2.9.1 General settings
Navigation (from shortcut menu):
Main Menu -> Set -> System -> General
Select the
[General settings]
option
to bring up the menu, as shown in figure
3.12.
Figure 3.12 general settings
[Time Zone]:
Set time zone you are currently located in. The default setting is
CMT +8.
[System time]:
set the system time manually.
Summary of Contents for PIONEER 3
