© Copyright QVIS ®. All documentation rights reserved.
31
Preset option:
To set a location for the preset, the procedure is as follows :
Step 1:
Increase the preset point: Enter a number in
，
then click
the
button, you can then add a preset point.
Step 2:
Deleting preset: Enter a number in
，
then click the
button, you can delete a preset point.
Step 3:
Enter a number in
，
Then click on the
button
，
the
camera head will rotate to the preset position.
Figure 2.13 preset configuration
[Advanced]:
click on the
button, as shown in Figure 2.13, and enter
a new operation menu page, see Figure 2.14 PTZ Config.
[
Focus
]:
Click either buttons
/
to adjust the focus of the camera.
[
Iris
]:
Click either buttons
/
to adjust the iris of the camera.
Summary of Contents for PIONEER 3
