Quincy QSV 2200, Instruction Manual

Page: 66 / 124

Section IV - Installation
66 Quincy Vacuum Pump-QSV Series
Before lifting, reinstall the transport securing bolts. Make sure that the forks protrude from the other side of
the frame. The vacuum pumps can also be lifted after inserting beams in the slots.
Make sure that the beams cannot slide and that they protrude from the frame equally. The chains must be
held parallel to the bodywork by chain spreaders in order not to damage the Vacuum pump. The lifting
equipment must be placed in such a way that the vacuum pump is lifted perpendicularly. Lift gently and avoid
twisting.
WARNING!
It is not allowed to lift the Vacuum pump if the canopy parts or lifting supports are not completely
installed. When the vacuum pump is being lifted, it is also forbidden to come under the load or to
perform maintenance activities to it.
Acclimatization
NOTICE!
When moving the vacuum pump into an installation room, condensation can occur on some
components.
To avoid the dew from harming the electrical components, ensure at least 2 hours of acclimatization
before switching on the vacuum pump
.
4.3 Electrical connections
WARNING!
Working with machinery controlled by a frequency converter requires special safety precautions.
These safety precautions depend on the kind of network used (TN, TT, IT system). Consult Quincy.
NOTICE!
Most vacuum pump are designed for use in TT/TN networks and are intended for industrial
environments where the electrical supply is separated from the residential/commercial supply
network.
To use the machine in light industrial, commercial or residential environments with a shared supply
network or in an IT network, extra measures can be required: contact Quincy.
Electrical connections for QSV 2200 up to QSV 3200