quiko WINNY LIGHT, Installation Manual

Page: 16 / 56

16
16
Detail B
Detail C
For doors with one sliding door
leaf, the traction devices are to be
attached to the rear carriages. If the
door opens to the left, attach to the
left carriage. If it opens to the right,
attach it to the right carriage. For
doors that open to the left, the plate
faces downwards. For doors that
open to the right, the plate faces
upwards. In its centre, insert the
joint of the belt anchored by the
perforated counter-plate.
You can make adjustments to align the
doors. Loosen the two fastening screws of
the traction devices and the traction device
will move right or left thanks to the slots.
Once adjusted, tighten the socket-head
screws all the way down.
To adjust the tension of the belt, slightly loosen socket-head screw
A of the pulley. Then screw (to tighten) and unscrew (to loosen)
hex screw
B
.
Once the desired tension is attained, firmly tighten screws A.
16 - ADJUSTMENT OF ELECTRICAL LOCK AND
RELEASE
If there is no electrical lock, skip to the next
chapter. Otherwise, carefully follow these
instructions:
For double sliding doors, you will need to
install on the left door an additional plate that
allows the block to hook both doors.
The axis of the block must be fixed, for two
sliding doors, 32 mm to the right of the centre
of the beam.
A
B