manualshive.com logo in svg

Quantum SDLC 2.7, Installation Manual

Share
Download
Quantum SDLC 2.7 Installation Manual Download Page 98

92

Upgrade, Remove, Repair

Figure 59

Restore Database from Backup file

•

Launch 

Add/Remove Scalar DLC > Repair > Repair database

 mode (see 

Figure 45

 on page 81). 

Select "Upgrade".

•

When upgrade is finished, restart PC.

Step 9

Launch Scalar DLC Management GUI. If required, re-configure SCSI targets and LUNs (see 

Figure 49

 on page 87 and 

Figure 50

 on page 87).

Upgrade Issues

When the upgrade is performed always check whether all names are correctly mapped and all SCSI adapter 
models used in previous versions of the Scalar DLC software are still supported. Remove old SCSI client(s) 
and create new client assigned to an old library if it is required. Executing the complete 

inventory

 is strongly 

recommended afterwards to maintain the database integrity.

Installing Scalar DLC Service Packs

The Scalar DLC service pack usually comes on its own CD with its own build-in autorun.

Note that the service pack may contain fixes with features not documented in the Scalar DLC Reference 
Guide, so always check the readme and release notes that can be found on the Scalar DLC Service Pack 
CD.

Note

Do not start Scalar DLC software at this time. It will not be functional.

Summary of Contents for SDLC 2.7

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands