manualshive.com logo in svg

Quantum SDLC 2.7, Installation Manual

Share
Download
Quantum SDLC 2.7 Installation Manual Download Page 87

Installation Guide

81

If the account name already exists and the password does not match the existing account’s password, the 
User Account warning appears. See 

Figure 23

 on page 60. Go back and specify correct password, or 

another user account.

If the account is repaired successfully, the Component Registration window appears. See 

Figure 24

 on page 

60.

Database

The 

Repair Scalar DLC Database

 process allows the user to repair the damaged Scalar DLC database. It 

contains the same database upgrade engine as the Scalar DLC installation and offers the same 
functionality.

Figure 45

Repair Database

Choose either the “recreate database” option to acquire the new, clean database, or “upgrade” option to 
update existing database according to current standards (the upgrade details are described at 

Table 8

 on 

page 63). Click 

Next

 to proceed to the upgrade and the final screen.

Modify

The 

Modify

 process allows to add or remove a number of Scalar DLC software features and to install the 

necessary software drivers. All changes will be applied only after system restart.

Note

To repair the Scalar DLC installed under a domain account, the domain administrator 
rights are required.

Summary of Contents for SDLC 2.7

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands