manualshive.com logo in svg

Quantum SDLC 2.7, Installation Manual

Share
Download
Quantum SDLC 2.7 Installation Manual Download Page 94

88

Upgrade, Remove, Repair

Figure 52

Access to Stop Scalar DLC

•

The Scalar DLC software service will be stopped.

Figure 53

Scalar DLC is successfully stopped

•

Re-start Scalar DLC using the Scalar DLC icon on the toolbar.

Figure 54

Access to Start Scalar DLC

•

After a successful start an appropriate message displays.

Figure 55

Scalar DLC is successfully started

Step 10

When the upgrade is complete verify that all target cards are correctly assigned and work 
properly.

Advanced Upgrade

Follow these steps to perform the upgrade of the Scalar DLC software on any PC and/or to restore the 
Scalar DLC configuration from an old version of the software.

Note

Only the Advanced upgrade procedure can restore the Scalar DLC configuration from 
standard (basic) to failover (redundant) solution, or vica verse.

Note

The instruction below is applied for both Standard and Failover solution. Unless the 
other is specified, each operation is assumed to be executed on Node1.

Summary of Contents for SDLC 2.7

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands