Quantum SDLC 2.7, Installation Manual

Page: 16 / 152

10 Setting Up the Scalar DLC
• Single On-Board NICS (build-in Ethernet)
• CD-RW
• 3.5” inch Diskette Drive
*Required for 2.5 installation only
• Redundant AC Power
• 15" or greater SVGA Display
• Standard keyboard & mouse
• NT/2000 compliant LVD/HVD SCSI initiator adapter, library connection
• 1 middle length (2-3 m) SCSI cable (68 pins) for the library connection.
• Recovery CD (Windows 2000 or 2003)
The following hardware (not shown on the scheme) is optional.
• SCSI/FC target adapter(s)
• Appropriate SCSI/FC cable(s)
• Fibre Channel switch
• SNC
Dual-aisle Requirements
Figure 2 Scalar DLC Basic Solution: Dual-aisle
The minimum PC system hardware requirements are summarized in following list.
• A single PC:
• 1G MHZ or faster Intel Xeon or equivalent CPU
• 512 MB RAM
• Dual 18Gb SCSI Hard Drives
• Single On-Board NICS (build-in Ethernet)
CAUTION
Do not use anteries (brand) SCSI adapters that do not allow setting reset on
startup via BIOS.
CAUTION
Adaptec 39160 is an LVD/SE adapter, so note Table 16 on page 71 when
choosing SCSI adapter for the library.
Note
Although it is not recommended to use DA libraries in a Scalar DLC standard solution,
this configuration is possible.