manualshive.com logo in svg

Quantum SDLC 2.7, Installation Manual

Share
Download
Quantum SDLC 2.7 Installation Manual Download Page 57

Installation Guide

51

Installing the Scalar DLC

The Scalar DLC software must be installed on a PC running Windows 2000 / 2003. The Management GUI 
is installed as a part of the Scalar DLC software. After the software is installed, a remote user can connect 
to the Scalar DLC host.

During the 

installation

 process, all required components are installed. System restart may be necessary 

after the installation of certain components. The system will warn the user that the restart is required, and 
the installation process will continue until all files have been installed.

•

Before installing the Scalar DLC perform the 

Solution Checkup

 on page 51.

•

Using the Scalar DLC setup engine install the required 

Software Components

 on page 52.

•

After this is finished, install 

Scalar DLC Software

 on page 56.

Solution Checkup

Make sure the appropriate solution is set up before installing the Scalar DLC.

See 

Setting Up the Standard Solution

 on page 9, 

Setting Up the Failover Solution

 on page 15, and 

Setting 

Up the Self-Domain Solution

 on page 37.

Note

To install the Scalar DLC software and all required components, local administrator 
rights are required.

The cluster solutions (both failover and self-domain) require the domain user with either 
local or domain administrator rights.

Summary of Contents for SDLC 2.7

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands