manualshive.com logo in svg

Quantum SDLC 2.7, Installation Manual

Share
Download
Quantum SDLC 2.7 Installation Manual Download Page 124

118

SCSI/FC Target Drivers

Installing the SCSI/FC Target Drivers

The SCSI Target Mode Driver installation installs the Target driver for the SCSI/Fibre Channel Adapter(s) 
present on PC.

Figure below shows the Setup Start window of the SCSI Target software.

Figure 64

SCSI Target Start Setup

Click 

Next 

to proceed.

Note

If the SCSI Target Mode Driver installation is launched on a PC with the installed target 
drivers from a previous version (for example, 2.4), the install engine will remove the old 
drivers. See 

Add/Remove SCSI Target Drivers

 on page 122.

CAUTION

If there is a Virtual SCSI Target Mode Driver installed, it should be removed before 
the SCSI Target Mode Driver installation. This can be done from 

Control Panel > 

Add-Remove Programs.

Note

There should be the Initiator driver(s) activated in the system before the Target driver(s) 
are installed. See 

Initiator Driver

 on page 117 for the details.

Summary of Contents for SDLC 2.7

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands