Installation Guide
47
Step 2
Create Cluster on Node1.
•
Start > Administrative Tools > Cluster Administrator
•
Choose 'Create new cluster' and OK. Next. Enter cluster name (SDLCCLUSTER2003) and
Next.
•
Review Node1 name and Next. The wizard will analyze an existing configuration.
•
Next. Enter cluster IP (static, unique) and Next.
•
Enter domain admin account & Password. Next.
•
Review cluster summary and Next. Wizard creates a cluster.
•
Next and Finish.
Step 3
Join Node2 to Cluster
•
Power on Node2 and wait till it comes up. Wait circa 5 min until the virtual cluster name will
be available from Node2. Switch to Node2.
•
Start > Administrative Tools > Cluster Administrator. Choose 'Open Connection to cluster'
and enter the cluster name (SDLCCLUSTER2003).
•
OK. Then File > New > Node. Add new Node wizard starts.
•
Next. Add, then Next. The wizard will analyze an existing configuration.
•
Enter domain user account & password. Next.
•
Review cluster summary and Next. Wizard adds node to a cluster.
•
Next and Finish. The cluster is ready.
Step 4
Ensure the cluster works.
•
Select Start > Administrative Tools > Cluster Administrator
•
Select Groups > Cluster Group
•
Select File > Move Group to verify the cluster is working properly
•
Move group again and return ownership to Node1.
CAUTION
The cluster name must not be longer than 14 symbols.
Summary of Contents for SDLC 2.7
