Installation Guide
19
For the optional additional activity, see
Setting Up the Library
on page 123,
Building Client Connections
on
page 131,
Installing SCSI/FC Target Adapters on a Live Machine
on page 134, and
Host/Library
Communication using Fibre Channel and SNC
on page 127. See also
Upgrade, Remove, Repair
on page
81.
Collecting Setup Data
Collect the following information before starting setup.
•
Nodes
•
Node1 computer name (14 symbols max)
•
Node1 public IP address
•
Node2 computer name (14 symbols max)
•
Node2 public IP address
•
public Subnet mask
•
public default Gateway
•
public preferred DNS
•
public alternate DNS (optional)
•
public primary WINS (optional)
•
public secondary WINS (optional)
•
Node1 private IP address
•
Node2 private IP address
•
private subnet mask
•
Local administrator login name and password (same on both nodes)
•
Scalar DLC serial number (same on both nodes
•
Cluster
•
name (14 symbols max)
•
IP address
•
Subnet mask = public subnet mask
•
Domain
•
name
•
domain admin name and password
•
directory services restore mode password
Table 4
Failover Solution: Installation Time
Installation procedure
Time
Provide cabling and setup for dual PC failover system
30 min
SCSI configuration for RAID and library
20 min
Set IP addresses and computer names
30 min
Configure primary and secondary domain controllers
45 min
Summary of Contents for SDLC 2.7
