Installation Guide
91
Step 4
(For Failover solution only; for Standard solution skip this step.)
Repeat
Step 3
on page 90 for the Node2.
Step 5
Insert Scalar DLC 2.7 Install CD. Install the Scalar DLC and all required components, as
described in
Installing the Scalar DLC
on page 51.
•
Install Java. Install MSDE 2000 if required (note that MSDE must be installed on RAID disk for the
failover solution, use ‘specified’ and ‘R:”).
•
Follow the Scalar DLC installation sequence till the Scalar DLC is installed with a new, clean
database.
•
(For Failover solution only; for Standard solution skip this substep.)
When the Scalar DLC is installed on Node2, select “Use existing database“ and proceed.
•
(optional) Install the required SCSI Target drivers (see
Installing the SCSI/FC Target Drivers
on
page 118). Then configure/activate the SCSI/FC Target adapter(s) via SCSI Target Port Tool, as
described in
Activating Target Mode
on page 121.
•
(optional) Install DAS Client software if required (see
Installing DAS Client
on page 71).
•
Reboot the PC.
Step 6
(For Failover solution only; for Standard solution skip this step.)
Repeat
Step 5
on page 91 for the Node2.
Step 7
(For Failover solution only; for Standard solution skip this step.)
Restore Scalar DLC Cluster configuration.
•
Insert Scalar DLC Install CD. Close Autorun. Run
<CD>:\Scalar_DLC\Cluster\SDLC_ClusterConfig.exe
•
Click
Make SDLC Cluster Configuration
button. “OK” when complete.
Step 8
Restore the Database from Backup.
•
Stop Scalar DLC supervisor (see
Figure 52
on page 88). Launch Scalar DLC DB Tool (see
Figure
56
on page 89).
•
Log on the DB Tool (see
Figure 57
on page 89). Open
Restore
tab and restore database from
device (that is, from backup file "OldSDLC.db"), as shown in
Figure 59
on page 92.
Summary of Contents for SDLC 2.7
