Chapter 1: Components
QXS-648 System
QX and QXS Setup Guide
35
Host CNC Ports Configured with SFPs (FC or iSCSI)
The following figure shows CNC ports configured with SFP+ transceivers that support 4, 8, or 16 Gb FC, or
10 GbE iSCSI connections. The SFPs look identical. Refer to the CNC LEDs that apply to the specific
configuration of your CNC ports.
Figure 42:
Controller I/O Module with FC or iSCSI Host CNC Ports
CACHE
CLI
CLI
LINK
ACT
S ERVICE−1
S ERVICE−2
PORT 0
PORT 1
PORT 2
PORT 3
MGMT
EXP 0
EXP 1
6Gb/s
S
S
A
LINK 0
LINK 1
5
2
3
6
8
1
7
4
= FC LEDs
= 10GbE iSCSI LEDs
1
2
3
4
5
6
7
8
1.
CNC FC or iSCSI SFP+ (ports used for host
connection or replication)
2.
CLI Port (USB - Type B)
3.
Service Port 2 (Service Personnel Use Only)
4.
Reserved for Future Use
5.
Network Port
6.
Service Port 1 (Service Personnel Use Only)
7.
Disabled Button (used by engineering only)
(Sticker shown covering the opening)
8.
Mini-SAS Expansion Port
