![background image](http://html2.mh-extra.com/html/quantum/qx-series/qx-series_setup-manual_3502442178.webp)
Chapter 6: LED Descriptions
LEDs for 12-, 24-, 48-Drive Systems
QX and QXS Setup Guide
163
LEDs for 48-Drive RAID Chassis (2U48)
Figure 115:
2U Drive Chassis (Bezel Installed)
5
6
7
8
1
2
3
4
5
1.
Chassis ID LED
2.
Chassis Status LED: Unit Locator
3.
Chassis Status LED: Fault/Service Required
4.
Chassis Status LED: FRU OK
5.
Chassis Status LED: Temperature Fault
LED
Description
Definition
1
Chassis ID
LED
Green — On
Enables you to correlate the chassis with logical views presented by management
software. Sequential chassis ID numbering of RAID Chassis begins with the integer 0.
The chassis ID for an attached expansion chassis is nonzero.
2
Unit Locator
White blink — Chassis is identified
Off — Normal operation
3
Fault/Service
Required
Amber — On
Chassis-level fault condition exists. The event has been acknowledged but the
problem needs attention.
Off — No fault condition exists.
4
FRU OK
Green — On
The chassis is powered on with at least one power supply operating normally.
Off — Both power supplies are off; the system is powered off.
Table 44:
LEDs for 12-Drive RAID Chassis front panel (bezel installed)