Chapter 2: Installing the Chassis
Install Drives Into the QXS-456 Drive Chassis
QX and QXS Setup Guide
64
The above image illustrates the installation of drives into a drawer. When orienting the drive module for
insertion into the target drawer, note the following:
l
The drive installation procedure applies to the left drawer (Drawer 0) and the right drawer (Drawer 1).
l
Drive row and slot numbering for each drawer is provided on the sticker laminated to the exterior wall of
each drawer.
Diagram 3: Drawer 0 Fully Populated
The above image illustrates Drawer 0 fully populated with drives. Note the following:
l
Staggered elevation of slide rails
l
Locations of laminated drawer row/slot-numbering reference diagrams
l
Orientation of installed drives
