Chapter 2: Installing the Chassis
Install Drives Into the QXS-456 Drive Chassis
QX and QXS Setup Guide
65
Diagram 4: Drawer 1 Fully Populated
The above image illustrates Drawer 1 fully populated with drives. Note the following:
l
Staggered elevation of slide rails
l
Locations of laminated drawer row/slot-numbering reference diagrams
l
Orientation of installed drives
Open a Drawer
Caution:
Before opening and/or accessing either of the drawers via its handle, you must first remove
the front bezel. The chassis bezel is required to provide EMI protection for the product, you must re-
attach the bezel to the chassis after examining the drawer.
1. Using a No.2 phillips screwdriver, loosen the two screws securing the handle to the front face of the
drawer.
2. Turn the thumbwheel counter-clockwise to disengage the handle from it’s upright stowed position.
Figure 71:
QXS-456 with bezel removed
